diff --git a/docs/control_commands.md b/docs/control_commands.md
index 7996f7d..2b8211c 100644
--- a/docs/control_commands.md
+++ b/docs/control_commands.md
@@ -4,7 +4,7 @@ AACP uses opcode `9` for control commands. opcodes are 16 bit integers that spec
 
 An AACP packet is formated as:
 
-`04 00 04 00 [opcode, little endianness] [data]`
+`04 00 04 00 [opcode, little endian] [data]`
 
 So, our control commands becomes
 
@@ -15,53 +15,220 @@ So, our control commands becomes
 Bytes that are not used are set to `0x00`. From what I've observed, the `data3` and `data4` are never used, and hence always zero. And, the `data2` is usually used when the configuration can be different for the two buds: like, to change the long press mode. Or, if there can be two "state" variables for the same feature: like the Hearing Aid feature.
 
 ## Control Commands 
-These commands
 
-| Command identifier | Description | Format |
-|--------------|---------------------|--------|
-| 0x01 | Mic Mode | Single value (1 byte): `0x00` = Automatic, `0x01` = Right, `0x02` = Left |
-| 0x05 | Button Send Mode | Single value (1 byte) |
-| 0x06 | Has ownership | Single value (1 byte): `0x01` = own, `0x00` = doesn't own |
-| 0x0A | Ear Detection | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x12 | VoiceTrigger for Siri | Single Value (1 byte): `0x01` = enabled, `0x01` = disabled |
-| 0x14 | SingleClickMode | Single value (1 byte) |
-| 0x15 | DoubleClickMode | Single value (1 byte) |
-| 0x16 | ClickHoldMode | Two values (2 bytes; First byte = right bud Second byte = for left): `0x01` = Noise control `0x05` = Siri |
-| 0x17 | DoubleClickInterval | Single value (1 byte): 0x00 = Default, `0x01` = Slower, `0x02` = Slowest|
-| 0x18 | ClickHoldInterval | Single value (1 byte): 0x00 = Default, `0x01` = Slower, `0x02` = Slowest|
-| 0x1A | ListeningModeConfigs | Single value (1 byte): bitmask, Off mode = `0x01`, ANC=`0x02`, Transparency = 0x04, Adaptive = `0x08` |
-| 0x1B | OneBudANCMode | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x1C | CrownRotationDirection | Single value (1 byte): `0x01` = reversed, `0x02` = default |
-| 0x0D | ListeningMode | Single value (1 byte): 1 = Off, 2 = noise cancellation, 3 = transparency, 4 = adaptive |
-| 0x1E | AutoAnswerMode | Single value (1 byte) |
-| 0x1F | Chime Volume | Single value (1 byte): 0 to 100|
-| 0x20 | Connect Automatically | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x23 | VolumeSwipeInterval | Single value (1 byte): 0x00 = Default, `0x01` = Longer, `0x02` = Longest |
-| 0x24 | Call Management Config | Single value (1 byte) |
-| 0x25 | VolumeSwipeMode | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x26 | Adaptive Volume Config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x27 | Software Mute config | Single value (1 byte) |
-| 0x28 | Conversation Detect config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x29 | SSL | Single value (1 byte) |
-| 0x2C | Hearing Aid Enrolled and Hearing Aid Enabled | Two values (2 bytes; First byte - enrolled, Second byte = enabled): `0x01` = enabled, `0x02` = disabled |
-| 0x2E | AutoANC Strength | Single value (1 byte): 0 to 100|
-| 0x2F | HPS Gain Swipe | Single value (1 byte) |
-| 0x30 | HRM enable/disable state | Single value (1 byte) |
-| 0x31 | In Case Tone config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x32 | Siri Multitone config | Single value (1 byte) |
-| 0x33 | Hearing Assist config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x34 | Allow Off Option for Listening Mode config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x35 | Sleep Detection config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
-| 0x36 | Allow Auto Connect | Single value (1 byte): `0x01` = allow, `0x02` = disallow |
-| 0x39 | Raw Gestures config | Single value (1 byte): bitmask, single press = `0x01`, double press = `0x02`, triple press = `0x04`, long press = `0x08` |
-| 0x3C | System Siri message config | Single value (1 byte) |
-| 0x3E | Uplink EQ Bud config | Single value (1 byte) |
-| 0x3F | Uplink EQ Source config | Single value (1 byte) |
-| 0x40 | In Case Tone Volume | Single value (1 byte): 0 to 100 |
-| 0x41 | Disable Button Input config | Single value (1 byte) |
+| Command identifier | Description |
+|--------------|---------------------|
+| 0x01 | Mic Mode |
+| 0x05 | Button Send Mode |
+| 0x06 | Owns connection |
+| 0x0A | Ear Detection |
+| 0x12 | VoiceTrigger for Siri |
+| 0x14 | SingleClickMode |
+| 0x15 | DoubleClickMode |
+| 0x16 | ClickHoldMode |
+| 0x17 | DoubleClickInterval |
+| 0x18 | ClickHoldInterval |
+| 0x1A | ListeningModeConfigs |
+| 0x1B | OneBudANCMode |
+| 0x1C | CrownRotationDirection |
+| 0x0D | ListeningMode |
+| 0x1E | AutoAnswerMode |
+| 0x1F | Chime Volume |
+| 0x20 | Connect Automatically |
+| 0x23 | VolumeSwipeInterval |
+| 0x24 | Call Management Config |
+| 0x25 | VolumeSwipeMode |
+| 0x26 | Adaptive Volume Config |
+| 0x27 | Software Mute config |
+| 0x28 | Conversation Detect config |
+| 0x29 | SSL |
+| 0x2C | Hearing Aid Enrolled and Hearing Aid Enabled |
+| 0x2E | AutoANC Strength |
+| 0x2F | HPS Gain Swipe |
+| 0x30 | HRM enable/disable state |
+| 0x31 | In Case Tone config |
+| 0x32 | Siri Multitone config |
+| 0x33 | Hearing Assist config |
+| 0x34 | Allow Off Option for Listening Mode config |
+| 0x35 | Sleep Detection config |
+| 0x36 | Allow Auto Connect |
+| 0x37 | PPE Toggle config |
+| 0x38 | Personal Protective Equipment Cap Level config |
+| 0x39 | Raw Gestures config |
+| 0x3A | Temporary Pairing Config |
+| 0x3B | Dynamic End of Charge config |
+| 0x3C | System Siri message config |
+| 0x3D | Hearing Aid Generic config |
+| 0x3E | Uplink EQ Bud config |
+| 0x3F | Uplink EQ Source config |
+| 0x40 | In Case Tone Volume |
+| 0x41 | Disable Button Input config |
 
+## Command Details
 
+### 0x01 - Mic Mode
+Format: Single value (1 byte)
+Values: `0x00` = Automatic, `0x01` = Right, `0x02` = Left.
+
+### 0x05 - Button Send Mode
+Format: Single value (1 byte)
+Additional notes: Logged as "Set Button Send Mode: %d". May involve context updates for button handling.
+
+### 0x06 - Owns connection
+Format: Single value (1 byte)
+Values: `0x01` = own, `0x00` = doesn't own.
+
+### 0x0A - Ear Detection
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled.
+
+### 0x12 - VoiceTrigger for Siri
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled.
+
+### 0x14 - SingleClickMode
+Format: Single value (1 byte)
+
+### 0x15 - DoubleClickMode
+Format: Single value (1 byte)
+
+### 0x16 - ClickHoldMode
+Format: Two values (2 bytes; First byte = right bud, Second byte = left bud).  
+Values: `0x01` = Noise control, `0x05` = Siri.  
+
+### 0x17 - DoubleClickInterval
+Format: Single value (1 byte)
+Values: 0x00 = Default, `0x01` = Slower, `0x02` = Slowest.  
+
+### 0x18 - ClickHoldInterval
+Format: Single value (1 byte)
+Values: 0x00 = Default, `0x01` = Slower, `0x02` = Slowest.  
+
+### 0x1A - ListeningModeConfigs
+Format: Single value (1 byte)
+Values: Bitmask, Off mode = `0x01`, ANC=`0x02`, Transparency = 0x04, Adaptive = `0x08`.  
+
+### 0x1B - OneBudANCMode
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x1C - CrownRotationDirection
+Format: Single value (1 byte)
+Values: `0x01` = reversed, `0x02` = default.  
+
+### 0x0D - ListeningMode
+Format: Single value (1 byte)
+Values: 1 = Off, 2 = noise cancellation, 3 = transparency, 4 = adaptive.  
+
+### 0x1E - AutoAnswerMode
+Format: Single value (1 byte)
+
+### 0x1F - Chime Volume
+Format: Single value (1 byte)
+Values: 0 to 100.  
+
+### 0x20 - Connect Automatically
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled.
+
+### 0x23 - VolumeSwipeInterval
+Format: Single value (1 byte)
+Values: 0x00 = Default, `0x01` = Longer, `0x02` = Longest.  
+
+### 0x24 - Call Management Config
+Format: Single value (1 byte)
+
+### 0x25 - VolumeSwipeMode
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x26 - Adaptive Volume Config
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x27 - Software Mute config
+Format: Single value (1 byte)
+
+### 0x28 - Conversation Detect config
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x29 - SSL
+Format: Single value (1 byte)
+
+### 0x2C - Hearing Aid Enrolled and Hearing Aid Enabled
+Format: Two values (2 bytes; First byte - enrolled, Second byte = enabled)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x2E - AutoANC Strength
+Format: Single value (1 byte)
+Values: 0 to 100.  
+
+### 0x2F - HPS Gain Swipe (swipe to adjust amplification)
+Format: Single value (1 byte)
+
+### 0x30 - HRM enable/disable state
+Format: Single value (1 byte)
+
+### 0x31 - In Case Tone config
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x32 - Siri Multitone config
+Format: Single value (1 byte)
+
+### 0x33 - Hearing Assist config
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x34 - Allow Off Option for Listening Mode config
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x35 - Sleep Detection config
+Format: Single value (1 byte)
+Values: `0x01` = enabled, `0x02` = disabled
+
+### 0x36 - Allow Auto Connect
+Format: Single value (1 byte)
+Values: `0x01` = allow, `0x02` = disallow
+
+### 0x37 - PPE Toggle config
+Format: Single value (1 byte)
+
+### 0x38 - Personal Protective Equipment Cap Level config
+Format: Single value (1 byte)
+
+### 0x39 - Raw Gestures config
+Format: Single value (1 byte)
+Values: Bitmask, single press = `0x01`, double press = `0x02`, triple press = `0x04`, long press = `0x08`.  
+
+### 0x3A - Temporary Pairing Config
+Format: Single value (1 byte)
+Values: `0x01` = Temporary, `0x02` = Permanent
+
+### 0x3B - Dynamic End of Charge config
+Format: Single value (1 byte)
+
+### 0x3C - System Siri message config
+Format: Single value (1 byte)
+
+### 0x3D - Hearing Aid Generic config
+Format: Single value (1 byte)
+
+### 0x3E - Uplink EQ Bud config
+Format: Single value (1 byte)
+
+### 0x3F - Uplink EQ Source config
+Format: Single value (1 byte)
+
+### 0x40 - In Case Tone Volume
+Format: Single value (1 byte)
+Values: 0 to 100.  
+
+### 0x41 - Disable Button Input config
+Format: Single value (1 byte)
 
 > [!NOTE]
-> - These identifiers have been extracted from the macOS 15.4 Beta (24E5238a)'s bluetooth stack. 
-> - I have already added the ranges of values a command takes that I know of. Feel free to experiemnt by sending the packets for which the range/values are not given here.
+> - These identifiers have been extracted from the iOS 19.1 Beta (23B5044l)'s bluetooth stack. 
+> - I have already added the ranges of values a command takes that I know of. Feel free to experiment by sending the packets for which the range/values are not given here.